Comments by Tad Laird:
"The set up uses a KRC power steering pump ($230).
These are used by Nascar and other "Stock Car" type racers.
The power steering fluid resevoir is a off the shelf type found at Summit or Pegasus.
Both carry a variety and this one required no additional modification ($60). Bracket ran $12.
Goodridge hoses and AN fittings (~$90). The 90 degree fittings were expensive.
Oil cooler (swedish make)with mounting another $75.
The fabrication for the power steering pump bracket ran up my cost.
I had it CNC'd machined out of steel for strength. Needless to say I bore the cost for the prototype.
Adjustment is by using a heim joint set up. Gates 7350 v-belt was a whopping $9.
If your interested in something similar the shop kept a template and they can make more.
They can also sell you the pump, resevoir, and cooler. They would have take mine apart to make a hose set.
You can reach them through www.ccfuelinjection.com and contact Dave Capurro.
The mounting of my cooler may be different from other set up's as I have removed my air conditioning set up
and electric fan. This would necessitate a change in the hoses and cooler placement on some cars.
I may reinstall the fan later using the evo mounts or trade out to a aftermarket set up."
|