Home
Back to Tech Articles
place holder
Roll Cage Symposium
Trailing Arm Bushings
place holder
Effective Wheel Rates
Koni SA Shock Dyno
Odds and Ends

Odds and Ends Technical details of interest

The "X-Pipe"
You may have heard of the X-Pipe, but what is it and how does it work?
Factory Exhaust Center Section
A study of the BMW Motorsport solution to the exhaust center section.
S14 Cylinder Block Sonic Test Results
When rebuilding an S14 engine it is common to go with a larger bore. How big can one safely go? Sonic testing gives a useful guide.
S14 Cylinder Head Porting Job
How big can S14 ports get and still make power? These pictures of a TMS Stage III porting job are a good example.
E30 M3 Intake Gaskets - p/n 318 vs. p/n 319
The original 2.3L intake gasket has been superseded by the Evo III part. How do the two gaskets compare?
Tender Springs vs. Helper Springs
If you're running coil-overs with linear race springs then you might consider adding tender or helper springs. This page explains how these springs work.


Home
Back to Tech Articles
place holder
Roll Cage Symposium
Trailing Arm Bushings
place holder
Effective Wheel Rates
Koni SA Shock Dyno
Odds and Ends